Superstock Rules 2006

These General rules section MUST be read to supplement these rules

 

Permitted chassis

TT01, TB02, TA04 and TA05 only. No carbon lower chassis parts are allowed. TRF414, TRF415 and TB evolution series chassis are not allowed.

Gearing

Gearing is limited. The following ratios show maximum gearing allowed for each chassis.

TT01 – 58/25 (6.03:1)

TB02 – 55/24 (5.96:1)

TA04 – 120/43 (5.95:1)

TA05 – 70/26 (6.06:1), 105/39 (6.06:1) or 90/34 (5.96:1) 
 

  
  Below are lists of parts that are allowed in this class. The first section lists general parts that can be used on any of the 4 chassis. Further to that are parts that are specific to an individual chassis.
 		  
 

Non Chassis specific parts 

Motors

Tamiya Superstock TZ

  1. Motors will be supplied by the organisers for the events as part of the competitor’s registration fee. As these motors are re-buildable they will remain with the competitor between events.
     
  1. New motors will be available at any time during the season from the race organisers, or they can be purchased from your local Tamiya stockist.
     
  1. The motors must remain un-tampered, however as these are re-buildable they may be serviced. This includes the use of Comm lathes, cleaning fluids, cotton buds and fibre sticks. Running in/comm drops and lubricants are also permitted.
     
  1. Only Tamiya replacement brushed maybe used (53581). These may NOT be serrated, drilled or cut, although edges maybe filed. The brushes must also keep the eyelet for connection. No soldering of brushes is allowed. Extra capacitors, power caps and schottky diodes maybe fitted. On-board motors cooling fans are not permitted.
     
  1. These motors have a fixed timing, and any attempt to increase the timing of a motor is forbidden. Motors that are found to have extra advanced timing will lead to disqualification from the event.

ESC

Choice of ESC is open.  

Bodyshells

Any Tamiya electric touring body. Subaru Legacy B4 bodies are not permitted. Tamiya Hop up wings are permitted 

Damper parts

All Tamiya Dampers are permitted. This includes CVA, TRF and TRF Special versions. Parts are interchangeable between damper models as long as they can be fitted correctly without modification. All Tamiya on road hop up springs as well as kit springs are allowed.

Screws, nuts washers etc

All Tamiya screws, nuts, washers, connectors, turnbuckles and shafts are permitted. This includes standard parts (50xxx, 51xxx), hop up parts (53xxx), limited edition parts (49xxx) and Tamiya spare parts (7 digit numbers). Wheel hubs can be replaced with Tamiya clamp type of 4, 5 or 6mm. All Tamiya spacers, O rings, washers and shims can be used in ways other than directed in the manual for removal of play between moving parts. For the purpose of ‘handling tuning’, some parts may be omitted, otherwise the car must be built as directed in the manual. Gluing of parts together to avoid using screws is not allowed.

Other Parts

Roll bars from other Tamiya chassis’s may be used as long as they can be fitted without modification. All Tamiya servo savers, tierods and ballends are permitted.  Non-Tamiya Pinions of the same pitch (04 or 06 module) maybe used. Spur gears must remain Tamiya. Non Tamiya or other Tamiya hop-up bearings of the same size and type (53008, 53029 & 53066 etc) can be used. Bearing shields may not be removed.

Suspension

TA04, TA05 and TB02 chassis, may use either TA04 style or TRF Lightweight suspension systems. Swing shafts of any length (39, 42, 46 and 48mm) maybe used with these cars to allow for different suspension systems and track widths. 

Parts for the 2 systems are as follows

  


TA04 Style Suspension


TRF Lightweight Suspension
50867      TA04 C Parts
50868      TA04 D Parts
50869      TA04 E Parts
0004374  TA05 E Parts
50870      TA04 F Parts
50985      TRF414M F Parts
50882      TA04 King Pin Set
50986      TRF414M Ball Connector King Pin Set
9805682  3x30mm Shaft
9805683  3x25.3mm Shaft
50942      TA04SS D Parts
53427      TA04 Hard Suspension Arm
53428      TA04 Hard Rear Upright
53458      Racing Hub Carrier Set
53472      TA04 Toe-in Rear Uprights
53578      TA04SS Hard Suspension Arm
53579      TA04SS Hard Front Upright
50990      TB Evolution 3 Suspension Shaft Set
53687      TB Evolution 3 Aluminium Rear Upright
53499      TA04 Wheel Axle
53681      Assembly Universal Titanium Wheel Axle		 51103      TB Evolution IV C Parts
51104      TB Evolution IV D Parts
51105      TB Evolution IV E Parts
51106      TB Evolution IV F2 Parts
51107      TB Evolution IV F4 Parts
51101      TB Evolution IV Ball Connector King PIn
51100      TB Evolution IV 4.6x6mm Flanged Tube
51099      TB Evolution IV 2.6x25mm Screw Pin
51098      TB Evolution IV 2.6x22mm Screw Pin
51094      TB Evolution IV Wheel Axle
53718      TB Evolution IV Titanium Wheel Axle
53784      TB Evolution IV Aluminium Rear Upright 1.0
53807      TB Evolution IV Aluminium Rear Uprights (0)
53825      TB Evolution IV 2.6mm Stainless Suspension
               Shaft Set
53826      TB Evolution IV Fluorine Coated Ball Head
               King Pin

Common Parts that can be used with Both Systems
 
Suspension Blocks
    50980    TB Evolution 3 Suspension Mount (A)
    50981    TB Evolution 3 Suspension Mount (B)
    50982    TB Evolution 3 Suspension Mount (C)
    50983    TB Evolution 3 Suspension Mount (D)
    51064    TRF415 Front Bridge Suspension Mount (D)
    51065    TRF415 Suspension Mount (A)
    51066    TRF415 Suspension Mount (B)
    51067    TRF415 Suspension Mount (C)
    51068    TRF415 Suspension Mount (D)
    51069    TRF415 Suspension Mount (X)
    53609    TA04 Aluminium Suspension Mount (Front)
    53610    TA04 Aluminium Suspension Mount (Rear)
    53685    TRF415 Front Bridge Suspension Mount (A)
    53688    TB Evolution 3 Suspension Mount (E)
    53712    TB Evolution IV Suspension Mount (X)
    53713    TB Evolution IV Suspension Mount (A)
    53714    TB Evolution IV Suspension Mount (B)		     53715    TB Evolution IV Suspension Mount (C)
    53716    TB Evolution IV Suspension Mount (D)
    53717    TB Evolution IV Suspension Mount (E)
    53808    TRF415 Suspension Mount (XA)
    53809    TRF415 Suspension Mount (XB)
    53810    TRF415 Suspension Mount (XC)
    53811    TRF415 Suspension Mount (XD)
    53896    TRF415 Suspension Mount (E)
Swing Shafts
    53505    39mm Steel Swing Shafts
    53506    39mm Aluminium Rear Swing Shafts
    53501    42mm Steel Swing Shafts
    53502    42mm Aluminium Rear Swing Shafts
    51092    46mm Steel Swing Shafts
    53724    46mm Aluminium Rear Swing Shafts
    53836    48mm Steel Swing Shafts
    53871    48mm Aluminium Rear Swing Shafts

Suspension Blocks will require either 50994 5mm Suspension balls or 53709 5mm Fluorine Coated Suspension balls. Lightweight Aluminium (blue) swing shafts are only to be used on the rear of the car. All non-bridge type mounts may be used upside down with spacers as come with the TRF415 XA to XD sizes, in positions where a bridge mount is required.


Wheels

All Tamiya 26mm and 24mm (Medium-Narrow) wheels are permitted. 24mm Wheels must be used with 24mm tyres and inserts only. 26mm wheels must be used with 26mm tyres and inserts only. 1 insert per tyre only. Inserts must not be modified in anyway. Wheels must not be modified in any way other than directed, although the vent hole in the rim may be drilled to 4mm in the place of the original vent hole only. Gear ratios are to be the same for both size of wheels.
 
Tyres
 

 

26mm

53293

Type-A Reinforced Slick Tyres

53294

Type-B Reinforced Slick Tyres

 

 

 

 

 

24mm

53412

Type-B Molded Slick Tyres

53433

Type-A Molded Slick Tyres

53482

Type-B2 Molded Slick Tyres

53705

Type-B3 Molded Slick Tyres
 
 
Tyres must not be modified in any way. This includes belting and rounding of the edges of the tread. Any tyre additive is permitted. Individual tracks reserve the right to object to additives with a strong smell unless a COSHH report or sign approval can be produced to say it is safe. If this happens no action will be taken unless the additive is used again after instruction not to.
 		  

Inserts
 

 

26mm

53295

Inner Foam Tires

53113

Inner Sponge Tires (soft)

53156

Inner Sponge Tires (hard)

53209

Shaped Inserts (hard)

53250

Shaped Inserts (soft)

53834

Molded Inner soft 26mm

53835

Molded Inner hard 26mm

 

24mm

53434

Shaped Inserts (soft), blue

53435

Shaped Inserts (hard), black

53582

Shaped Inserts (medium), green

 

 

 

 

 

 

 

 
 
 


Only 1 insert per tyre. Inserts cannot be modified in anyway.
 

  
 

TT01 specific Parts only 

Standard Parts (50xxx, 51xxx, 7 digit aftermarket spares)
 

  
  All Standard parts from all kits featuring the  TT01, TT01-R and TT01-D chassis, or parts from other chassis that can be used for the purpose intended without modification.  
 
Hop-ups (53xxx)
 		  
 

53497

TT01 Ball Bearing Set

53620

TT01 Aluminium Propeller Shaft

53662

TT01 Turnbuckle Tie-Rod Set

53663

TT01 Ball Differential

53664

TT01 Aluminium Motor Heat Sink

53665

TT01 High Speed Spur Gear Set

53666

TT01 Metal Motor Mount Set

53670

TT01 Aluminium Racing Steering Set

53671

TT01 Front One-Way Unit

53672

TT01 Carbon Upper Frame

53673

Toe-In Rear Uprights

53682

Aluminium Bumper Stopper

53683

Urethane Medium Bumper, Blue

53694

TT01 Front Stabiliser Set

53695

TT01 Rear Stabiliser Set

53790

Cup Joint for Universal Shaft

53792

Assembly Universal Shafts

53800

Aluminium Toe-In Rear Uprights

53806

Ball Diff Joint Cup for Universal Shafts

53864

TT01 Aluminium Steering Link

53674

Adjustable Upper Arm Set

 

 
 
 
Limited Edition parts (49xxx)

NONE
 

  
 

TB02 specific Parts only

Standard Parts (50xxx, 51xxx, 7 digit aftermarket spares)
 

  
All Standard parts from all kits featuring the TB02 and TB02-R chassis, or parts from other chassis that can be used for the purpose intended without modification. This included parts from the the TB Evolution 3 chassis such as front one-way, carbon shock towers, but not the carbon twin deck chassis.
 


Hop-ups (53xxx)
 

  
 

53399

Aluminium Motor Heatsink

53563

F201 Diff Plate

53590

TB Evo III Reinforced One Way Cup Joint

53589

TB EVO3 Sealed Ball Bearing Set (15)

53616

TA04 Front Aluminium Body Mount (60mm)

53617

TA04 Front Aluminium Body Mount (65mm)

53626

TB Evo III One Way Ring Gear Carbon Plate

53627

Reinforced Diff Joint

53628

TB Evo III Aluminium Upper Arm Mount Set

53677

TB-02 Stabilizer Set

53678

TB-02 Racing Steering Set

53679

TB-02 SSG Carbon Center Plate

53680

TB-02 Aluminium Motor Mount

53686

TB Evo III L/W Aluminium Prop Shaft
  50991 TB Evolution 3 One-way Unit

53825

Evo 4 2.6mm Stainless Suspension Shafts
 
 
Limited Edition parts (49xxx)

49348   TB-02R Kit
49364   TB-02R Front Carbon Brace
49365   TB-02R Rear Carbon Brace
49369   TB-02R Lightweight Aluminium Prop Shaft (Blue)
49359   TB Evolution IV Direct Drive Spool
 

  
 

TA04 specific Parts only 

For a full list of TA04 parts or for any questions about legal parts, please email

 Standard Parts (50xxx, 51xxx, 7 digit aftermarket spares)

All Standard parts from all kits featuring the following chassis, TA04, TA04S, TA04SS, TA04R, TA04R (Tuned Chassis), TA04 Pro, TA04 TRF and TRF414 and its variations, or parts from other chassis that can be used for the purpose intended without modification.

Hop-ups (53xxx)

Hop up parts from all kits featuring the following chassis, TA04, TA04S, TA04SS, TA04R, TA04R (Tuned Chassis), TA04 Pro, TA04 TRF and TRF414 and its variations. Hop up parts released separately for any of the above kits and others which can be fitted without modification. This excludes all graphite, carbon fibre and SSG Flat (i.e. Not a tub) lower decks. (For example, 53606 TA04 SSG Carbon lower deck). Carbon top decks, shock towers and other parts are allowed.

Limited Edition parts (49xxx)

Limited edition parts from all kits featuring the following chassis, TA04, TA04S, TA04SS, TA04R, TA04R (Tuned Chassis), TA04 Pro, TA04 TRF and TRF414 and its variations. Hop up parts released separately for any of the above kits and others which can be fitted without modification. This excludes all graphite, carbon fibre and SSG Flat (i.e. Not a tub) lower decks.
 

  
 

TA05 specific Parts only 

Standard Parts (50xxx, 51xxx, 7 digit aftermarket spares)
 

  

All Standard parts from all kits featuring the TA05 chassis, or parts from other chassis that can be used for the purpose intended without modification.
 
Hop-ups (53xxx)
 		  
 

53833   TA05 Front One Way
53837   TA05 Aluminium Motor Heatsink
53841   TA05 Center One Way Unit
53842   TA05 Stabalizer Set
53843   TA05 Aramid Drive Belt
53844   TA05 Aluminium Transponder Stay
53845   TA05 Carbon Damper Stay (Front)
53846   TA05 Carbon Damper Stay (Rear)
53848   TA05 Aluminium Racing Steering Set
53849   TA05 High Precision Diff Joint
53857   04 Module Spur Gear (105T)
 53867   TA05 Front One Way Pulley
53870   TA05 Ti Coated Suspension Shaft

53874   High Precision Center Pulley Bushing
53875   TA05 Aluminium Servo Stay
53877   TA05 Front Direct Coupling
53882   TA05 Carbon Damper Stay Spacer
53883   TA05 Carbon Steering Link
53884   TA05 Carbon Battery Plate
53725   TB Evo 4 Carbon Body Mount Stay
53893   TA05 Lightweight Carbon Lower Deck
53894   TA05 Reinforced Carbon A Parts
53895   TA05 Reinforced Carbon K parts
53897   TA05 Aramid Drive Belt Blue
53904   TA05 Carbon Centre Brace
53905   TA05 Aluminium Side Brace Blue

  
 
Limited Edition parts (49xxx)
 		  

49360               TA05 Titanium Screw Set
Any questions about these rules, or if you need more information on part numbers etc. Email